Insert usb flash drive into the receiver. To install the Enigma receiver should be transferred to the regime of Enigma, see explanation above. In this folder, extract two files from the archive downloaded in the link mentioned above (2 files: uimage and e2jffs2.img). In the root directory create a folder enigma2. Take the flash drive, format it to FAT32, must have one partition. Turn on the receiver.Īfter about 5 seconds, the display shows. Press and hold the OK button on the front panel. Load instead of the official firmware Enigma2 A. After about 5 seconds, the display shows. Load Enigma2 instead of the official firmware A. After that, connect via FTP to the receiver using the username root and password root, unless you changed the password. Go to Menu-> System-> Network Settings-> Configure IP addresses, and see what ip address assigned to the receiver. At the end of the process on the display of the receiver appears and the receiver will restart Gaining access to the receiver via FTP If you are running firmware 1.1.35 and above.
Turn off the main switch off the receiver.
As a result, you will have about 10 files with a file extention tar.gz and Version.xml. Unpack the firmware files from the archive to a folder where drive:/spark. ICreate a folder /spark in the root directory of your usb flash drive. Make sure your usb flash drive is formated to FAT32. Wirelessly connect your computer or laptop to a high speed Wi-Fi network with the D-Link Wireless N150 USB Adapter (DWA-125) and transfer files and browse the. Drivers DWA-125 Windows Driver Release Notes=Hardware: A1/A2/A3Date: 9Utility: V1.53Driver: Windows 2000/XP x86Windows XP 圆4Windows Vista x32Windows Vista 圆4Windows 7 x86 Windows 7 圆4Windows 8 x86Windows 8 圆4Windows 8.1 x86Windows 8.1 圆4-Hardware: A1/A2/A3Date: 4Utility: V1.52Driver: Windows 2000/XP x86Windows XP 圆4Windows Vista x32Windows Vista 圆4Windows 7 x86 Windows 7 圆4Windows 8 x86Windows 8 圆4Fixes:1.
0 kommentar(er)
